Rubber shot mats Tegum building protection mat The Tegum building protection mat offers protection against mechanical damage for high-quality waterproofing and insulation in accordance with DIN 18195 Part 10. Application The building protection mat can be used on flat and ground roofs, terraces and parking decks as well as underground garages. The Tegum building protection mat also provides optimum protection in civil engineering, bridge and traffic construction, gardening and landscaping. Processing Loosely laid or bonded to waterproofing. After laying, cover immediately with gravel, sand or humus soil, stone slabs, etc. The rolls are overlapped by the width of a hand. The overlaps can be glued with a suitable adhesive if required. This covering is not suitable as footfall sound insulation, it serves purely as protection against mechanical damage.
TEGUBIT E4 soundproofing film Heavy foil Highly flexible sound insulation film made of vulcanized elastomers, filled with a selected, specifically heavy mineral powder mixture and self-adhesive on one side. Contains no openly volatile or toxic substances, heavy metals or their compounds, neither in the binder nor in the fillers. This ensures problem-free disposal of waste. Thanks to its low thermoplasticity, run-off is impossible, even on vertical surfaces and at high temperatures. Due to the selected elastomers, there is no embrittlement even below 0°C and thus no reduction in the dam properties. Application TEGUBITR heavy foil is suitable for all applications where sound has to be absorbed over a wide temperature range. It is particularly suitable for use in roof extensions, where TEGUBITR heavy foil can be used simultaneously as noise insulation and as a sound-absorbing membrane. It is also well suited for interior fittings, door panels, kitchen fittings, air conditioning and ventilation systems as well as vehicle, machine, cabin and metal façade construction.