TEGUBAND® PU 155 Preparation and sealing tape Construction TEGUBAND® PU 155 is a one-sided self-adhesive, open-cell, fine-pored sealing tape made of polyurethane foam. Use This tape is particularly suitable as padding and insulating material, as sealing tape against draughts and dirt, for sound insulation and as sealing tape for exposed concrete acoustic panels and boards.
TEGUBAND® PE 158 Preparation and sealing tape Construction TEGUBAND® PE 158 is a self-adhesive sealing tape on one side Made of fine-pored, closed-cell polyethylene foam. The band is particularly cuddly and stands out high resistance to aging, and it also behaves chemically neutral. Also available with intermediate film (dust protection). Use TEGUBAND® PE 158 is used as a facing tape in the glazing industry and as a sealing and spacer tape in ventilation, machine and apparatus construction.
TEGUTAPE® 6200 Butyl adhesive tape with fleece Versatile self-adhesive adhesive and sealing tape based on butyl rubber, laminated on one side with plastic fleece. TEGUTAPE® 6200 is characterized by high adhesive strength and is solvent-free and can be painted over and plastered over immediately. Application Because the flexible fleece lamination has smaller dilatation movements follows, TEGUTAPE® 6200 can be used to bridge joints be used between different materials. Also This means that connections from window to parapet or sheet metal to concrete are possible possible. Do not paint over dilating bridging. Note On smooth surfaces such as aluminum, zinc sheet, polyester, glass, etc. TEGUTAPE® 6200 can be used without a primer, a primer However, using TEGUCOL® 273 Primer increases the initial adhesion. For porous surfaces such as plaster, concrete, masonry, etc. We recommend TEGUCOL® 273 Primer.
TEGUTAPE® 6100 Butyl adhesive tape with aluminum Flexible, versatile sealing and repair tape Butyl rubber base with a tear-resistant plastic aluminum Composite film. TEGUTAPE® 6100 is characterized by high Adhesive strength, a weather and UV-resistant surface as well a soundproofing effect. The tape is solvent-free and hardly combustible. Application Suitable as a sealing tape in air conditioning and ventilation technology in aluminum and metal construction. It will also be referred to as universal Sealing and repair tape used. Note On smooth surfaces such as aluminum, zinc sheet, polyester, glass, etc. TEGUTAPE® 6100 can be used without a primer, a primer However, using TEGUCOL® 273 Primer increases the initial adhesion. For porous surfaces such as plaster, concrete, masonry, etc. We recommend TEGUCOL® 273 Primer.
TEGUTAPE® 6000 Butyl adhesive tape Strongly adhesive, double-sided sealing and adhesive tape. The TEGUTAPE® 6000 butyl adhesive tape ensures a strong and permanent connection as well as a secure sealing effect most building materials such as concrete, masonry, wood and chipboard. About the dimensional accuracy of the TEGUTAPE® 6000 butyl adhesive tape To ensure this, it is also available with a calendered one Longitudinal thread available. Application Ideally suited for connection and overlap bonding with TEGUVAP® vapor retarders and barriers, with TEGUTOP® 1000 cover and under-roof membranes and with wind and airtight layers based on polyethylene. Additionally the TEGUTAPE® 6000 butyl adhesive tape is also used for bonding and sealing in apparatus, air conditioning and ventilation construction as well as in metal facade and wooden construction used. Note The contact surfaces must be dry, clean, free of dust, grease and oil be. Porous or highly absorbent surfaces are also recommended Pre-treat with TEGUCOL® 273 Primer.
TEGUTAPE 1000 green GREEN INDOOR Single-sided high-performance adhesive tape for round penetrations indoor. Very adhesive, reinforced with a scrim. TEGUTAPE® 1000 GREEN INDOOR is supple and draws characterized by high adhesive strength and enormous tear resistance. Application Suitable for bonding airtight films to one another or moisture barriers, for interior penetrations, Connections of pipes, rafters, purlins, etc. Adheres to wood, Gypsum fiber and plasterboard, cement fiber boards, metal, hard plastic, etc. Note The surface must be smooth, firm, dry, free of dust, oil and grease.
TEGUTAPE UV-2100 BLACK OUTDOOR Single-sided high-performance adhesive tape for overlaps, Penetrations and windows in the outside area. Very adhesive, reinforced with scrim. TEGUTAPE® UV-2100 BLACK OUTDOOR is UV-resistant and is characterized by high adhesive strength and high tear resistance. Application Suitable for windproof bonding of overlaps and penetrations and windows on the outside. Special aging resistance for use on facade membranes. Adhering to wood, Cement fiberboard, metal, hard plastic, etc. For gluing of facade membranes and wind seals. Note The surface must be smooth, firm, dry, free of dust, oil and grease.
TEGUTAPE® 738 High-performance fabric tape has excellent adhesion to various surfaces down to -10°C. It is primarily used in the construction industry and is suitable for bonding PE films to concrete.
TEGUBAND® K-SK 323 TEGUBAND® K-SK 323 is self-adhesive on one side and consists of asbestos-free ceramic fibers with minimal amounts of organic binders. It has a very uniform texture, low thermal conductivity and good processing properties. The ceramic fiber nonwoven composite also has very good heat/cold shock resistance and a low heat storage capacity. No smoke or gas development in the event of fire. TEGUBAND® K-SK 323 can be cut to size using standard equipment. In addition, it is chemically and physically stable and is only attacked by hydrofluoric and phosphoric acid (HF and H3PO4) and concentrated alkalis (NaOH and KOH). Water has no influence on the properties.
Tegucol 273 TEGUCOL® 273 Primer is required as a primer for optimum adhesion of TEGUTAPE® adhesive tapes to rough, porous and absorbent substrates, such as concrete, masonry, cement stone, plaster, wood, etc.
TEGUTAPE 781 Very supple, thin, UV-resistant tape made of special paper with high adhesion. No color bleeding, easy to remove.
TEGUBAND® PC 273 Preparation and sealing tape Construction TEGUBAND® PC 273 is a self-adhesive sealing tape on one side Made of closed-cell soft PVC foam. The ribbon is hardly combustible and self-extinguishing and has a good Aging resistance. Use TEGUBAND® PC 273 is particularly suitable for sound insulation and for sealing and insulating in vehicle, metal, bodywork and boat construction.
TEGUBAND® NEO 343 Preparation and sealing tape Construction TEGUBAND® NEO 343 is a one-sided self-adhesive, closed-cell Neoprene foam tape, which is characterized by a high Dimensional stability combined with good aging and heat resistance distinguishes. It is also worth mentioning that it is very good Resistance to aliphatic solvents, mineral oils and fats. With chemicals, especially in concentrated form A preliminary test is recommended. Use TEGUBAND® NEO 343 is frequently used in chemical plant, metal and mechanical engineering.
TEGUBAND® SUPER FR Firestop Ceramic fiber tape TEGUBAND® K-SK 323 is self-adhesive on one side and consists of asbestos-free ceramic fibers with minimal amounts of organic Binders. It has a very uniform texture, low Thermal conductivity and good processing properties. The ceramic fiber fleece composite also has very good heat/ Cold shock resistance and a deep heat storage capacity. No Smoke or gas development in the event of a fire. TEGUBAND® K-SK 323 can be cut using standard equipment. Aside from that It is also chemically and physically stable and is only attacked by hydrofluoric and phosphoric acid (HF and H3PO4) and concentrated alkalis (NaOH and KOH). Water has no influence on it properties. Application Complementary to the sealant PENSIL® 300 TEGUBAND® K- SK 323 as a lining, sealing and backfilling tape in systems and structures that have increased fire protection requirements have to be fair. In addition, TEGUBAND® K-SK 323 for the thermal separation of metal components used.
TEGUTAPE® 5000 Alu Self-adhesive and cold-applied bituminous-based sealing tape for reliable sealing of joints, gutters, covers, glass roofs, steel structures, roof coverings, eaves and valley flashings.
Aluminum lead-colored Self-adhesive and cold-applied bituminous-based sealing tape for reliable sealing of joints, gutters, covers, glass roofs, steel structures, roof coverings, eaves and valley flashings.
TEGUTAPE® 5000 Copper Self-adhesive and cold-applied bituminous-based sealing tape for reliable sealing of joints, gutters, covers, glass roofs, steel structures, roof coverings, eaves and valley flashings.